Try the questions in the test above first, then open each one here to see the correct answer and why every other option is wrong.
01A company buys 200 Android phones for field technicians. The phones are for work only, technicians install approved apps from a managed catalog, and IT needs device-level policies that a work profile cannot enforce. Which Android Enterprise deployment should IT choose?
Practice question Unit: Mobile Devices
AWork profile on personally owned devices
This option manages only a work space on a personal phone and cannot enforce device-wide policies.
BWork profile on company-owned devices for mixed use
Mixed use leaves a personal profile in place, but these phones are meant exclusively for work.
CFully managed devices with no personal space ✓ Correct answer
Fully managed deployments are for company-owned, work-only devices and allow the full range of policies.
DDedicated devices locked to one kiosk app
Dedicated devices are single-purpose and locked to a fixed app, which does not suit technicians who choose their own approved apps.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 1.3, p.4; Google for Developers Android Enterprise Overview, Full management for work-only company-owned devices; Full management for dedicated devices
Ask a friend
02A secondary DNS server stopped updating its zone from the primary after a firewall change. Clients on both sides still resolve names normally. The new rule permits only UDP 53 between the two servers. What change should the administrator make?
Practice question Unit: Networking
AAllow UDP 67 between the two servers
UDP 67 belongs to DHCP servers and has no role in DNS zone refresh.
BAllow TCP 389 between the two servers
TCP 389 is LDAP, which is a directory access protocol and is not how DNS replicates a zone.
CAllow TCP 443 between the two servers
TCP 443 carries HTTPS and would not carry DNS zone refresh traffic.
DAllow TCP 53 between the two servers ✓ Correct answer
DNS also uses TCP port 53, and zone refresh activities must use TCP because they need reliable transfer, while ordinary queries work over UDP.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 2.1, p.5; IETF RFC 1035 Domain Names - Implementation and Specification, Section 4.2
Ask a friend
03A new Wi-Fi 7 access point broadcasts a separate SSID that is restricted to the 6 GHz band. A user's laptop has a simultaneous dual-band 2.4 GHz and 5 GHz Wi-Fi 6 adapter. It sees the guest and staff SSIDs but not the 6 GHz one. What is the most likely reason?
Practice question Unit: Networking
AThe laptop's radio does not support the 6 GHz band ✓ Correct answer
A 2.4/5 GHz dual-band radio cannot tune to 6 GHz, so an SSID offered only there is invisible to it.
BThe 2.4 GHz band is too crowded to display new networks
Crowding on 2.4 GHz may slow a connection, yet the other SSIDs show up, so it does not hide one network.
CA Wi-Fi 7 access point cannot serve any Wi-Fi 6 client
Wi-Fi 7 works across 2.4, 5 and 6 GHz, which is why this laptop can still see and use the other SSIDs.
DThe laptop's Bluetooth radio is blocking the 6 GHz channels
Bluetooth sits in the 2.4 GHz band and cannot block a different band that the laptop never scans.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 2.2, p.5; Wi-Fi Alliance, Wi-Fi (MAC/PHY) page (Wi-Fi 6 and Wi-Fi 7 generation descriptions, 2.4 GHz, 5 GHz and 6 GHz bands)
Ask a friend
04A family wants a curved ultrawide monitor for watching films in a dim room. They sit directly in front of the screen and want the lowest-cost option that still delivers deep blacks. Which panel type fits best?
Practice question Unit: Hardware
AIPS
IPS blacks tend to look dark gray in a dim room because contrast is only moderate, so it falls short of the deep-black requirement.
BMini-LED
Mini-LED gives high contrast without burn-in, but it costs more than a standard LCD, so it fails the lowest-cost requirement.
CVA ✓ Correct answer
VA offers contrast of roughly 3,000:1 or more at moderate cost and is common in curved ultrawide models; viewing angle matters little when seated centrally.
DTN
TN is cheap and fast, but it has lower contrast and the weakest color, so blacks would not be deep.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.1, p.8; HP Tech Takes, Panel Types: What Are Monitor Panel Types?
Ask a friend
05A technician builds a PC on a motherboard that has one USB 3.2 Gen 1 header and two USB 2.0 headers. A user plugs a USB 3.0 external SSD into a front-panel port and transfers stall near 35 MB/s, while the same drive and cable are much faster on a rear port. What is the most likely cause?
Practice question Unit: Hardware
AThe front-panel cable is connected to the Thunderbolt header on the board
The Thunderbolt header is for a Thunderbolt add-in card; it does not feed front-panel Type-A ports.
BThe front-panel ports are wired to a USB 2.0 header on the motherboard ✓ Correct answer
A USB 2.0 header tops out at 480 Mb/s, and real transfers land near 40 MB/s, while a Gen 1 header offers up to 5 Gb/s.
CUSB Type-A connectors on the front panel are limited to USB 2.0 speeds
Type-A connectors exist on both USB 2.0 and USB 3.0 ports; connector shape does not set speed, the controller and header do.
DThe USB 3.2 Gen 1 header limits every port on the board to 480 Mb/s
The Gen 1 header supports up to 5 Gb/s and does not slow other ports; the rear port proves the drive itself is fast.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.2, p.8; ASUS PRIME Z690M-PLUS D4 User Manual, Motherboard Information: USB 2.0 headers and USB 3.2 Gen 1 header; Dell OptiPlex 7060 Small Form Factor Service Manual, Technology and components, USB features
Ask a friend
06A student says a DDR4-3200 module runs on a 3200 MHz clock and moves about 12.8 GB/s. Which correction is accurate?
Practice question Unit: Hardware
AThe clock is 3200 MHz, and bandwidth is 25.6 GB/s because DDR doubles the bus width
DDR does not widen the bus; it transfers data on both clock edges, so the clock is half the data rate.
BThe clock is 1600 MHz, and data moves on both edges for 25.6 GB/s of peak bandwidth ✓ Correct answer
3200 MT/s on both clock edges means a 1600 MHz clock, and 3200 MT/s across a 64-bit module is 25.6 GB/s.
CThe clock is 1600 MHz, and bandwidth is 12.8 GB/s because data moves on one edge
The clock is right, but DDR uses both edges, so the bandwidth is double this figure.
DThe clock is 800 MHz, and four transfers per cycle give 25.6 GB/s of bandwidth
DDR4 does not make four transfers per clock cycle, so the clock is not 800 MHz.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.3, p.8; Kingston DDR5 Memory Standard overview (MKF-954), section JEDEC Industry Standard Specifications (MT/s note)
Ask a friend
07An administrator is about to install a cumulative update on a Windows Server VM that is a domain controller in a Hyper-V environment where several domain controllers replicate Active Directory. A quick way to roll back is needed if the update fails. Which checkpoint type is the better choice?
Practice question Unit: Virtualization and Cloud Computing
AStandard checkpoint, which also captures the memory state
Standard checkpoints do save memory state, but they can cause data consistency problems on systems that replicate data between nodes.
BStandard checkpoint, because it works as a full backup of the data
A checkpoint is not a full backup, and treating a standard one as such risks inconsistency with replicated directory data.
CProduction checkpoint, which uses Volume Shadow Copy Service ✓ Correct answer
Production checkpoints use Volume Shadow Copy Service to produce a data-consistent state, which suits systems such as Active Directory that replicate between nodes.
DNeither, because checkpoints cannot be created for domain controllers
Hyper-V can checkpoint such a VM; the point is choosing the checkpoint type that keeps replicated data consistent.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 4.1, p.11; Microsoft Learn Using checkpoints to revert virtual machines to a previous state
Ask a friend
08A ThinkCentre with several add-in cards boots in legacy compatibility mode on firmware that can also boot natively. At startup it gives 4 long beeps and shows error 8998, a message that shadow RAM for option ROM is insufficient. Which change addresses this?
Practice question Unit: Hardware and Network Troubleshooting
ASet UEFI first or disable CSM in BIOS setup ✓ Correct answer
Error 8998 means option ROM space is exhausted; on a UEFI-capable system the fix is putting UEFI first or disabling CSM (or removing some add-in cards).
BEnable Above 4GB Decode and leave CSM turned on
Above 4GB Decode applies to error 8999 for PCIe MMIO space, and keeping CSM on leaves the option ROM shortage in place.
CReplace the memory modules with a larger kit
Shadow RAM for option ROMs is a firmware address region, so adding system memory does not enlarge it.
DReplace the system board and reinstall the cards
Board replacement is far out of proportion when a BIOS mode change resolves the condition.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.1, p.12; Lenovo ThinkCentre M75q-1 Hardware Maintenance Manual (2019), Chapter 4 Symptom-to-FRU index, Beep symptoms and POST error codes (8998)
Ask a friend
09A RAID 5 array on a MegaRAID-based hardware controller has a global hot spare available. The controller reports the first SMART error on one member drive, and the array is still Optimal. What will the controller do?
Practice question Unit: Hardware and Network Troubleshooting
AMark the drive failed at once and start a full rebuild, degrading the array
Failing the drive first would put the array into a degraded state, which this process is designed to avoid.
BCopy its data to the hot spare, then mark the drive failed after the copy ✓ Correct answer
A copy to a qualifying hot spare starts at the first SMART error, and the drive is marked failed only after the copy completes.
CWait for a second SMART error on that drive before taking any action
The controller acts on the first SMART error from a member drive, not the second.
DTake the array offline until the drive with the SMART error is replaced
The array stays online during the copy, so no downtime is needed.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.2, p.12; Intel RAID Software User Guide, Section 2.4.5 Copyback; Broadcom 12Gb/s MegaRAID Tri-Mode Software User Guide (MR-TM-SW-UG127), Replace
Ask a friend
10A trading desk runs the same fixed toolbar and chart grid on its monitors 12 hours a day in a dim room. The user wants deep blacks and high contrast, and the previous OLED monitor developed a faint permanent ghost of the toolbar. Which replacement fits these needs without that risk?
Practice question Unit: Hardware and Network Troubleshooting
AA Mini-LED monitor, because full-array local dimming gives high contrast and it has no burn-in risk. ✓ Correct answer
Mini-LED combines high contrast from local dimming with no burn-in risk, matching both requirements in a dim room.
BAn IPS monitor, because its contrast of about 1,000:1 gives deep blacks in a dim room and it cannot retain images.
IPS contrast is only moderate, so blacks look dark gray in a dim room, which misses the deep-black requirement.
CA new OLED monitor with a screen saver enabled, because screen savers remove the burn-in risk from a fixed toolbar.
Screen savers and auto-hiding bars only reduce burn-in on OLED, and a toolbar fixed for 12 hours a day still carries the risk.
DA TN monitor, because its fast response and wide viewing angles prevent images from persisting on the panel.
TN has the narrowest viewing angles and lower contrast, so it does not deliver deep blacks.
Reference: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.3, p.12; HP Tech Takes, Panel Types: What Are Monitor Panel Types?
Ask a friend