220-1201

شهادة CompTIA A+ Core 1 (220-1201): اختبار تجريبي مجاني

ابدأ بـ10 أسئلة مجانية لتعرف ما يحتاج إلى تدريب. بعد الانتهاء، راجع درجتك والوحدات الأضعف وشرح كل خيار.

675 من 900 تُعرض هنا نسبة الإجابات الصحيحة في التدريب. لا يمكن تحويلها إلى الدرجة المعيارية للاختبار أو تحديد النجاح بها.

العودة إلى صفحة شهادة CompTIA A+ Core 1 (220-1201)

أسئلة الاختبار التجريبي مع الإجابات والشرح

حلّ الأسئلة في الاختبار أعلاه أولًا، ثم افتح كل سؤال هنا لترى الإجابة الصحيحة وسبب خطأ كل خيار.

01A company buys 200 Android phones for field technicians. The phones are for work only, technicians install approved apps from a managed catalog, and IT needs device-level policies that a work profile cannot enforce. Which Android Enterprise deployment should IT choose?

سؤال تدريبي الوحدة: الأجهزة المحمولة

  1. أWork profile on personally owned devices

    This option manages only a work space on a personal phone and cannot enforce device-wide policies.

  2. بWork profile on company-owned devices for mixed use

    Mixed use leaves a personal profile in place, but these phones are meant exclusively for work.

  3. جFully managed devices with no personal space ✓ الإجابة الصحيحة

    Fully managed deployments are for company-owned, work-only devices and allow the full range of policies.

  4. دDedicated devices locked to one kiosk app

    Dedicated devices are single-purpose and locked to a fixed app, which does not suit technicians who choose their own approved apps.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 1.3, p.4; Google for Developers Android Enterprise Overview, Full management for work-only company-owned devices; Full management for dedicated devices

02A secondary DNS server stopped updating its zone from the primary after a firewall change. Clients on both sides still resolve names normally. The new rule permits only UDP 53 between the two servers. What change should the administrator make?

سؤال تدريبي الوحدة: الشبكات

  1. أAllow UDP 67 between the two servers

    UDP 67 belongs to DHCP servers and has no role in DNS zone refresh.

  2. بAllow TCP 389 between the two servers

    TCP 389 is LDAP, which is a directory access protocol and is not how DNS replicates a zone.

  3. جAllow TCP 443 between the two servers

    TCP 443 carries HTTPS and would not carry DNS zone refresh traffic.

  4. دAllow TCP 53 between the two servers ✓ الإجابة الصحيحة

    DNS also uses TCP port 53, and zone refresh activities must use TCP because they need reliable transfer, while ordinary queries work over UDP.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 2.1, p.5; IETF RFC 1035 Domain Names - Implementation and Specification, Section 4.2

03A new Wi-Fi 7 access point broadcasts a separate SSID that is restricted to the 6 GHz band. A user's laptop has a simultaneous dual-band 2.4 GHz and 5 GHz Wi-Fi 6 adapter. It sees the guest and staff SSIDs but not the 6 GHz one. What is the most likely reason?

سؤال تدريبي الوحدة: الشبكات

  1. أThe laptop's radio does not support the 6 GHz band ✓ الإجابة الصحيحة

    A 2.4/5 GHz dual-band radio cannot tune to 6 GHz, so an SSID offered only there is invisible to it.

  2. بThe 2.4 GHz band is too crowded to display new networks

    Crowding on 2.4 GHz may slow a connection, yet the other SSIDs show up, so it does not hide one network.

  3. جA Wi-Fi 7 access point cannot serve any Wi-Fi 6 client

    Wi-Fi 7 works across 2.4, 5 and 6 GHz, which is why this laptop can still see and use the other SSIDs.

  4. دThe laptop's Bluetooth radio is blocking the 6 GHz channels

    Bluetooth sits in the 2.4 GHz band and cannot block a different band that the laptop never scans.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 2.2, p.5; Wi-Fi Alliance, Wi-Fi (MAC/PHY) page (Wi-Fi 6 and Wi-Fi 7 generation descriptions, 2.4 GHz, 5 GHz and 6 GHz bands)

04A family wants a curved ultrawide monitor for watching films in a dim room. They sit directly in front of the screen and want the lowest-cost option that still delivers deep blacks. Which panel type fits best?

سؤال تدريبي الوحدة: الأجهزة والمكونات

  1. أIPS

    IPS blacks tend to look dark gray in a dim room because contrast is only moderate, so it falls short of the deep-black requirement.

  2. بMini-LED

    Mini-LED gives high contrast without burn-in, but it costs more than a standard LCD, so it fails the lowest-cost requirement.

  3. جVA ✓ الإجابة الصحيحة

    VA offers contrast of roughly 3,000:1 or more at moderate cost and is common in curved ultrawide models; viewing angle matters little when seated centrally.

  4. دTN

    TN is cheap and fast, but it has lower contrast and the weakest color, so blacks would not be deep.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.1, p.8; HP Tech Takes, Panel Types: What Are Monitor Panel Types?

05A technician builds a PC on a motherboard that has one USB 3.2 Gen 1 header and two USB 2.0 headers. A user plugs a USB 3.0 external SSD into a front-panel port and transfers stall near 35 MB/s, while the same drive and cable are much faster on a rear port. What is the most likely cause?

سؤال تدريبي الوحدة: الأجهزة والمكونات

  1. أThe front-panel cable is connected to the Thunderbolt header on the board

    The Thunderbolt header is for a Thunderbolt add-in card; it does not feed front-panel Type-A ports.

  2. بThe front-panel ports are wired to a USB 2.0 header on the motherboard ✓ الإجابة الصحيحة

    A USB 2.0 header tops out at 480 Mb/s, and real transfers land near 40 MB/s, while a Gen 1 header offers up to 5 Gb/s.

  3. جUSB Type-A connectors on the front panel are limited to USB 2.0 speeds

    Type-A connectors exist on both USB 2.0 and USB 3.0 ports; connector shape does not set speed, the controller and header do.

  4. دThe USB 3.2 Gen 1 header limits every port on the board to 480 Mb/s

    The Gen 1 header supports up to 5 Gb/s and does not slow other ports; the rear port proves the drive itself is fast.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.2, p.8; ASUS PRIME Z690M-PLUS D4 User Manual, Motherboard Information: USB 2.0 headers and USB 3.2 Gen 1 header; Dell OptiPlex 7060 Small Form Factor Service Manual, Technology and components, USB features

06A student says a DDR4-3200 module runs on a 3200 MHz clock and moves about 12.8 GB/s. Which correction is accurate?

سؤال تدريبي الوحدة: الأجهزة والمكونات

  1. أThe clock is 3200 MHz, and bandwidth is 25.6 GB/s because DDR doubles the bus width

    DDR does not widen the bus; it transfers data on both clock edges, so the clock is half the data rate.

  2. بThe clock is 1600 MHz, and data moves on both edges for 25.6 GB/s of peak bandwidth ✓ الإجابة الصحيحة

    3200 MT/s on both clock edges means a 1600 MHz clock, and 3200 MT/s across a 64-bit module is 25.6 GB/s.

  3. جThe clock is 1600 MHz, and bandwidth is 12.8 GB/s because data moves on one edge

    The clock is right, but DDR uses both edges, so the bandwidth is double this figure.

  4. دThe clock is 800 MHz, and four transfers per cycle give 25.6 GB/s of bandwidth

    DDR4 does not make four transfers per clock cycle, so the clock is not 800 MHz.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 3.3, p.8; Kingston DDR5 Memory Standard overview (MKF-954), section JEDEC Industry Standard Specifications (MT/s note)

07An administrator is about to install a cumulative update on a Windows Server VM that is a domain controller in a Hyper-V environment where several domain controllers replicate Active Directory. A quick way to roll back is needed if the update fails. Which checkpoint type is the better choice?

سؤال تدريبي الوحدة: المحاكاة الافتراضية والحوسبة السحابية

  1. أStandard checkpoint, which also captures the memory state

    Standard checkpoints do save memory state, but they can cause data consistency problems on systems that replicate data between nodes.

  2. بStandard checkpoint, because it works as a full backup of the data

    A checkpoint is not a full backup, and treating a standard one as such risks inconsistency with replicated directory data.

  3. جProduction checkpoint, which uses Volume Shadow Copy Service ✓ الإجابة الصحيحة

    Production checkpoints use Volume Shadow Copy Service to produce a data-consistent state, which suits systems such as Active Directory that replicate between nodes.

  4. دNeither, because checkpoints cannot be created for domain controllers

    Hyper-V can checkpoint such a VM; the point is choosing the checkpoint type that keeps replicated data consistent.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 4.1, p.11; Microsoft Learn Using checkpoints to revert virtual machines to a previous state

08A ThinkCentre with several add-in cards boots in legacy compatibility mode on firmware that can also boot natively. At startup it gives 4 long beeps and shows error 8998, a message that shadow RAM for option ROM is insufficient. Which change addresses this?

سؤال تدريبي الوحدة: استكشاف أخطاء الأجهزة والشبكات

  1. أSet UEFI first or disable CSM in BIOS setup ✓ الإجابة الصحيحة

    Error 8998 means option ROM space is exhausted; on a UEFI-capable system the fix is putting UEFI first or disabling CSM (or removing some add-in cards).

  2. بEnable Above 4GB Decode and leave CSM turned on

    Above 4GB Decode applies to error 8999 for PCIe MMIO space, and keeping CSM on leaves the option ROM shortage in place.

  3. جReplace the memory modules with a larger kit

    Shadow RAM for option ROMs is a firmware address region, so adding system memory does not enlarge it.

  4. دReplace the system board and reinstall the cards

    Board replacement is far out of proportion when a BIOS mode change resolves the condition.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.1, p.12; Lenovo ThinkCentre M75q-1 Hardware Maintenance Manual (2019), Chapter 4 Symptom-to-FRU index, Beep symptoms and POST error codes (8998)

09A RAID 5 array on a MegaRAID-based hardware controller has a global hot spare available. The controller reports the first SMART error on one member drive, and the array is still Optimal. What will the controller do?

سؤال تدريبي الوحدة: استكشاف أخطاء الأجهزة والشبكات

  1. أMark the drive failed at once and start a full rebuild, degrading the array

    Failing the drive first would put the array into a degraded state, which this process is designed to avoid.

  2. بCopy its data to the hot spare, then mark the drive failed after the copy ✓ الإجابة الصحيحة

    A copy to a qualifying hot spare starts at the first SMART error, and the drive is marked failed only after the copy completes.

  3. جWait for a second SMART error on that drive before taking any action

    The controller acts on the first SMART error from a member drive, not the second.

  4. دTake the array offline until the drive with the SMART error is replaced

    The array stays online during the copy, so no downtime is needed.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.2, p.12; Intel RAID Software User Guide, Section 2.4.5 Copyback; Broadcom 12Gb/s MegaRAID Tri-Mode Software User Guide (MR-TM-SW-UG127), Replace

10A trading desk runs the same fixed toolbar and chart grid on its monitors 12 hours a day in a dim room. The user wants deep blacks and high contrast, and the previous OLED monitor developed a faint permanent ghost of the toolbar. Which replacement fits these needs without that risk?

سؤال تدريبي الوحدة: استكشاف أخطاء الأجهزة والشبكات

  1. أA Mini-LED monitor, because full-array local dimming gives high contrast and it has no burn-in risk. ✓ الإجابة الصحيحة

    Mini-LED combines high contrast from local dimming with no burn-in risk, matching both requirements in a dim room.

  2. بAn IPS monitor, because its contrast of about 1,000:1 gives deep blacks in a dim room and it cannot retain images.

    IPS contrast is only moderate, so blacks look dark gray in a dim room, which misses the deep-black requirement.

  3. جA new OLED monitor with a screen saver enabled, because screen savers remove the burn-in risk from a fixed toolbar.

    Screen savers and auto-hiding bars only reduce burn-in on OLED, and a toolbar fixed for 12 hours a day still carries the risk.

  4. دA TN monitor, because its fast response and wide viewing angles prevent images from persisting on the panel.

    TN has the narrowest viewing angles and lower contrast, so it does not deliver deep blacks.

المرجع: CompTIA A+ 220-1201 (V15) Exam Objectives v4.0, Objective 5.3, p.12; HP Tech Takes, Panel Types: What Are Monitor Panel Types?

CompTIA A+ Core 1

التحضير الكامل للاختبار

كل هذا في شراء واحد.

  • جلسات تدريب تكميلي بتوقيت90 سؤالًا في 90 دقيقة. تخرج بدرجتك الكلية ودرجة كل وحدة.
  • تدريب على كل وحدة572 سؤال، لكل خيار شرحه ومصدره. تبدأ بأضعف وحداتك.
  • الملخص الشامل 1448 (PDF)مرتب حسب وزن كل وحدة في الاختبار. مع الوصول الدائم فقط.

اختر مدة الوصول

خطوة واحدة قبل الدفع

سجّل الدخول بحساب Google ثم تنتقل مباشرة إلى صفحة الدفع.

اعرف درجتك مجانًاالتحضير الكامل