Medical Devices Technician Exam Study Plan: 4 Weeks

A 4-week study plan for the SCFHS Medical Devices Technician exam by the weight of its twelve sections, with key points and references for each and a full mock two days before.

Last updated: · How we write and review content

Questions and time
150 questions · 3 hours
Pass mark
55%
correct answers to pass (55%)
83 of 150
Exam fee
Paid to SCFHS online when you apply through Mumaris Plus; the amount is shown in your application

Start with 10 free questions to find what needs more work. No sign-up, with answer explanations.

Try 10 free questions and see your level

Last checked: 17 November 2026. Weights and rules can change at any time, so check the classification exams page on the SCFHS website and the Medical Devices Technician content guideline (PDF) before you start. This is an independent website, not affiliated with the Saudi Commission for Health Specialties (SCFHS), Prometric or any government body.

The exam has 150 questions across twelve sections. This 4-week plan spends your time in proportion to the weights: the two 15% sections come first, the 10% sections get a full day or two, and the 5% sections are grouped. Week 4 closes the gaps and ends with a full mock. The detail of each section is in the exam content guide, and the application steps are in the registration guide.

Numbers to build your plan on

ItemWhat it means for your study
150 multiple-choice questionsPer the SCFHS content guideline. The guideline does not state the number of options; our questions use four.
3 hours180 minutes for 150 questions is 72 seconds a question. Practise sitting the full time in one go.
Pass mark 55%Your result on this site shows your percentage in each section, so you can compare sections and track progress.
Weights can move by up to 5% per sectionDo not skip a small section. Even a 5% section is worth about 7 or 8 questions.
LanguageThe guideline does not state it. We treat the exam as English (our inference), so revise terms in English from the start.
CalculatorNot mentioned in the guideline, so practise calculations by hand.

Split your time by section

SectionOfficial weightQuestionsWhere it sits in the plan
Biomedical Equipment Technology15%23Week 1 (days 2–4)
Advanced Electronics and Electricity15%22Week 2 (days 1–4)
Anatomy and Physiology10%15Week 3 (days 1–2)
Mathematics5%8Week 2 (days 4–5)
Physics5%7Week 2 (days 5–6)
Chemistry5%8Week 3 (day 3)
Medical Informatics10%15Week 3 (days 4–5)
Professionalism10%15Week 4 (day 1)
Practical Experience5%7Week 3 (day 6)
Research and Design5%8Week 4 (day 2)
Patient Safety, Electrical Safety and Hazards10%15Week 1 (days 5–6)
Regulation and Standards5%7Week 4 (day 3)

The plan assumes one to two hours a day. Count back four weeks from your booking date once SCFHS opens booking in your application. Each week is five study days and one day to redo the week's mistakes.

The 4-week plan

Week 1: Baseline, Biomedical Equipment and Safety (25%)

  1. Day 1: take the free practice test (10 free questions, no sign-up). Note your percentage in each section and your three weakest.
  2. Day 2: patient monitoring and biosignals (ECG, pulse oximetry, blood pressure, temperature), with sensors, transducers and electrodes.
  3. Day 3: life-support and therapeutic devices: ventilators, defibrillators, infusion pumps, anaesthesia and electrosurgery.
  4. Day 4: diagnostic imaging (X-ray, CT, ultrasound, MRI) and support equipment (sterilizers, oxygen supply, incubators, dialysis).
  5. Day 5: patient safety and electrical safety: shock, grounding, leakage current, IEC 60601-1 classes and applied part types.
  6. Day 6: alarms, infection control, radiation and fire hazards, then redo the week's mistakes.

Week 2: Electronics, Mathematics and Physics (25%)

  1. Day 1: DC circuits: Ohm's law, Kirchhoff's laws, series-parallel networks and power. Work every problem by hand.
  2. Day 2: AC circuits: reactance, impedance, resonance and transformers.
  3. Day 3: semiconductors (diodes, rectifiers, transistors), then operational amplifiers and analog signal processing.
  4. Day 4: digital logic and number systems (binary, hexadecimal), then algebra, logarithms, trigonometry and exponentials.
  5. Day 5: basic differentiation and integration, then physics: mechanics, fluids, pressure, heat and thermodynamics.
  6. Day 6: waves, sound, optics, electricity, magnetism and radiation, then redo the week's mistakes.

Week 3: Anatomy, Chemistry, Informatics and Practical Experience (30%)

  1. Day 1: cardiovascular system and cardiac electrophysiology, then the respiratory system and gas exchange.
  2. Day 2: nervous system and nerve conduction, then renal, musculoskeletal and other systems.
  3. Day 3: chemistry: atoms and bonding, moles and solutions, acids, bases and pH, gases and electrochemistry.
  4. Day 4: medical informatics: computer fundamentals and microprocessors, health data standards (HL7, FHIR, DICOM).
  5. Day 5: health information systems, PACS, data quality and cybersecurity of connected devices.
  6. Day 6: practical experience: preventive and corrective maintenance, testing and troubleshooting, inventory and lifecycle. Then redo the week's mistakes.

Week 4: Professionalism, Research, Regulation and the full mock (20%)

  1. Day 1: professionalism: ethics, patient rights, confidentiality, consent and accountability. Work through scenario questions.
  2. Day 2: research and design: biostatistics, the device design process, human factors, risk analysis, verification and validation.
  3. Day 3: regulation and standards: device classification, quality management systems, adverse event reporting and recalls, standards bodies.
  4. Day 4: your error notebook, then your weakest topics, 10 questions at a time.
  5. Day 5 (two days before the exam): sit one full mock exam (next section).
  6. Day 6: review only the mistakes from the mock. Do not open a new topic.

Key points and resources by section

Only books named on pages 3 and 4 of the SCFHS content guideline are listed. SCFHS says the list is a study aid, not an endorsement, and exam questions are not necessarily taken from it.

Biomedical Equipment Technology (15%)

Learn each device as three things: what it measures or delivers, its main blocks, and the faults you would check first. Group devices by function (monitoring, life support, imaging, support) so that similar ones stay together. Resources from the SCFHS reference list: Webster, Medical Instrumentation: Application and Design (4th or latest edition); Carr and Brown, Introduction to Biomedical Equipment Technology (4th or latest); Ritter, Hazelwood, Valdevit and Ascione, Biomedical Engineering Principles (2nd or latest); Bushberg, Seibert, Leidholdt and Boone, The Essential Physics of Medical Imaging (3rd or latest).

Advanced Electronics and Electricity (15%)

This is the section where hand calculation pays off. Do Ohm's and Kirchhoff's laws, series-parallel networks and power until they are automatic, then move to reactance, impedance, rectifier circuits, op-amp gain and binary and hexadecimal conversion. Resources from the SCFHS reference list: Floyd, Electronic Devices (Conventional Current Version) (10th or latest); Tocci, Digital Systems: Principles and Application (6th or latest).

Anatomy and Physiology (10%)

Link structure to function and to what a device measures: the cardiac cycle with the ECG waves, ventilation with gas exchange, the neuron with nerve conduction. Resources from the SCFHS reference list: Guyton and Hall, Textbook of Medical Physiology (13th or latest); Johnson, Biology for Engineers (2nd or latest).

Mathematics (5%)

Keep it short and regular: algebra, logarithms, trigonometry and exponentials first, then basic derivatives and integrals. A few problems a day beats a long session. Resources from the SCFHS reference list: Barnett, Ziegler, Byleen and Sobecki, Precalculus (7th or latest); Croft and Davison, Mathematics for Engineers: A Modern Interactive Approach (3rd or latest); McGraw-Hill, Precalculus: Student Edition (Advanced Math Concepts) (1st or latest).

Physics (5%)

Know the formulas and, above all, the units: pressure, flow, heat, wave speed and frequency, then the basics of electricity, magnetism and radiation that the imaging and electronics sections build on. Resources from the SCFHS reference list: Vasudeva, Modern Engineering Physics (revised edition); Bushberg, Seibert, Leidholdt and Boone, The Essential Physics of Medical Imaging (3rd or latest).

Chemistry (5%)

Cover atoms and bonding, moles and concentration, pH, and gas laws. Practise a mole or concentration calculation by hand every day. Resources from the SCFHS reference list: Ryan and Norris, Chemistry Course book (2nd or latest); Gallagher and Ingram, Complete Chemistry for Cambridge IGCSE (3rd or latest).

Medical Informatics (10%)

Separate hardware from data: memory and processors on one side, then standards (HL7, FHIR, DICOM), PACS and cybersecurity for connected devices on the other. Resources from the SCFHS reference list: Sinha, An Introduction to Computer: Basic Knowledge to computer (latest edition); Hall, Microprocessor and Interfacing Programming and Hardware (2nd or latest).

Professionalism (10%)

Questions are scenario-based: a patient, a colleague or a manager, and a decision. Learn the principles (confidentiality, consent, honesty, accountability) and apply them to cases. The reference list on pages 3 and 4 of the content guideline has no book for this section, so use the practice questions and their explanations as your main resource.

Practical Experience (5%)

Think like a workshop: the order of inspection, testing and repair, what goes in a maintenance record, and how a maintenance system tracks a device from purchase to disposal. Resources from the SCFHS reference list: Carr and Brown, Introduction to Biomedical Equipment Technology (4th or latest).

Research and Design (5%)

Know the vocabulary of study design (mean, standard deviation, sample, bias, p-value), the stages of the design process, and how risk is analysed, verified and validated. Resources from the SCFHS reference list: Essentials of Bio-Statistics: An overview with the help of Software (IJSMI); Glantz, Primer of Biostatistics (5th or latest); Rao and Richard, Introduction to Biostatistics and Research Methods (5th or latest).

Patient Safety, Electrical Safety and Hazards (10%)

Learn why each limit exists, not only its number. Know the device classes and applied part types, what ground and leakage currents are, and which alarms and hazards matter at the bedside. Resources from the SCFHS reference list: Webster, Medical Instrumentation: Application and Design (4th or latest edition); Carr and Brown, Introduction to Biomedical Equipment Technology (4th or latest).

Regulation and Standards (5%)

Learn the ideas, not the paperwork: how devices are classified by risk, what a quality management system does, when an adverse event is reported, and which bodies set standards. The reference list on pages 3 and 4 of the content guideline has no book for this section, so use the practice questions and their explanations as your main resource.

The full mock exam, two days before the real one

  • 150 questions in 180 minutes, in one sitting. The content guideline does not mention a break, so do not plan one.
  • No phone and no notes. Calculate by hand.
  • If a question stalls you, flag it and move on; at 72 seconds each, one slow question costs the next one.
  • Afterwards, open the result for each section. The section with the lowest percentage, weighted by its share of the exam, is what you review on your last study day.

How to handle your mistakes

  • Read the explanation of every option, not just the correct answer. A wrong option today can be the right answer tomorrow.
  • Write the cause of each mistake in one phrase: missing fact, mixed up two devices or formulas, calculation slip, or rushed reading. One cause usually repeats.
  • Redo missed questions after two days, then after a week. When you answer one correctly twice in a row, take it out of your notebook.

What this site adds to your plan

  • The free practice test: 10 free questions from the exam's sections, with the answer, its explanation and your percentage in each section, no sign-up.
  • The practice area: practise section by section, with an error notebook and practice on your weakest topics. The remaining questions need a paid pass.
  • The full mock exam of 150 questions in 180 minutes, the same question count and total time as the guideline. It also needs a paid pass.

This is an independent website, not affiliated with the Saudi Commission for Health Specialties (SCFHS), Prometric or any government body.

Medical Devices Technician

Finished reading? Try a set of questions

Start with 10 free questions to find your weakest units. Keep practising with the full question bank and mock exams from SAR 26.

Try 10 free questions and see your level Prices and what is included

Put the plan to work here

SAR 34 $9

One purchase · lifetime access · review guide included

  • 525 questions, every option explained with its source
  • Full mock exams: 150 questions in 180 minutes, like the real one
  • Practice that starts with your weakest units, plus a review of your mistakes
Complete Review Guide 2026–2027 coverComplete Review Guide 2026–2027 included (PDF)Ordered by the weight of each unit in the examBuy now · SAR 34or 7 days for SAR 26
See everything included

Full mock exams like the real one and 525 explained questions that find your weak spots and train them

  • Unlimited full mock exams to practise your pace and check your performance across the whole exam
  • Practise 10 weak-area questions, starting where you lose the most marks
  • 525 questions explaining why every option is right or wrong
  • Arabic and English with one pass
  • Unit notes and flashcards, then questions to check your understanding

This exam is part of professional classification as a medical devices technician, and you cannot get a practice licence without classification. If you do not pass you get further attempts under SCFHS rules and pay the evaluation fee. Source Last verified: 2026-11-17

Sources and references

  1. SCFHS – Medical Devices Technician Examination Content Guideline (sections, weights, pass mark, references) scfhs.org.sa
  2. SCFHS – Classification exams (Medical Devices Technician) scfhs.org.sa

Medical Devices Technician

Full prep for this exam

All of this in one purchase.

  • Full mock exam, same as the real one150 questions in 180 minutes. You get a total score and a score for every unit.
  • Practice unit by unit525 questions, every option explained with its source. Starts with your weakest units.
  • Complete Review Guide 2026–2027 (PDF)Ordered by each unit's weight in the exam. With lifetime access only.

Choose your access

One step before payment

Continue with your Google account and you go straight to the payment page.

Check my score freeFull prep