FE
A 5-Week Study Plan for the SCE FE Mechanical Part
A 5-week plan for the SCE FE mechanical part: 8 topics by question count, and a full 50-question, 180-minute mock exam.
- Questions and time
- 50 questions · 180 minutes
- Pass mark
- You must pass both the general part and your discipline part
- Exam fee
- SAR 400 for the general part and SAR 400 for the discipline part
Start with 10 free questions to find what needs more work. No sign-up, with answer explanations.
Try 10 free questions and see your levelPut what you just read into practice
Start with 10 free questions to find what needs more work. No sign-up, with answer explanations.
Try 10 free questions and see your levelLast checked: 17 November 2026. Question counts from the table of specifications in the Mechanical Engineering Exam Study Guide.
This plan is for the mechanical part (50 questions, 3 hours) and for candidates whose exam is about 5 weeks away. The general part is a separate 90-question session, so keep its own time; one part does not make up for the other. Start with the 10 free questions to see your level, then give extra days to the topics where you score lowest.
The five weeks
| Week | Focus | By the end of the week |
|---|---|---|
| 1 | Mechanical design (8) and measurements (4): 12 questions | Size a shaft, run a von Mises check and a fatigue check, and compute a measurement uncertainty without your notes |
| 2 | Engineering mechanics (7) and control (5): 12 questions | Solve a rigid-body kinetics problem, a gear train and a second-order response |
| 3 | Thermodynamics (8): 8 questions, plus manufacturing (5) | Solve an isentropic turbine, a steady-flow device and a cycle efficiency problem |
| 4 | Fluid mechanics (8) and heat transfer (5): 13 questions | A mixed set from weeks 1 to 4 of 25 questions in 90 minutes, and write down every wrong answer |
| 5 | Review of design, thermodynamics and fluids, then the full mock exam | A full mock exam of 50 questions in 180 minutes, then your weakest topics |
Why this order
Design, thermodynamics and fluid mechanics are 24 of the 50 questions, so each gets a full block and all three return in week 5 for review. Statics and strength of materials from design feed engineering mechanics, and Laplace transforms in control feed the modelling of thermal and fluid systems. The short topics (manufacturing, measurements) are placed beside the heavy ones so each week holds 12 to 13 questions. In every week, spend 15 to 20 minutes a day on the formulas from earlier weeks.
Week 5 day by day
| Day | Task |
|---|---|
| 1 | Review your mistake list and the lowest-scoring topics, starting with design, thermodynamics and fluids |
| 2 | Practise three weak topics, 10 questions each |
| 3 | Full mock exam: 50 questions in 180 minutes, in one sitting, with an approved calculator |
| 4 | Review every question in the mock, including those you got right by guessing |
| 5 | Weak topics again, 10 questions at a time |
| 6 | Short review of formulas and English terms |
| 7 | Rest. Prepare your admission card and calculator |
How to read your mock score
The mock shows your score in each topic, so you can see which topics pull you down. A topic of 8 questions such as thermodynamics moves your total far more than a topic of 4 such as measurements, so fix the large low-scoring topics first. Keep to about 3.6 minutes a question: answer, mark and move on, since a wrong answer is not penalised according to the study guide.
Finished reading? Try a set of questions
Start with 10 free questions to find your weakest units. Keep practising with the full question bank and mock exams from SAR 26.
Put the plan to work here
SAR 34 $9
One purchase · lifetime access · review guide included
- 530 questions, every option explained with its source
- Full mock exams: 50 questions in 180 minutes, like the real one
- Practice that starts with your weakest units, plus a review of your mistakes
See everything included
Full mock exams like the real one and 530 explained questions that find your weak spots and train them
- Unlimited full mock exams to practise your pace and check your performance across the whole exam
- Practise 10 weak-area questions, starting where you lose the most marks
- 530 questions explaining why every option is right or wrong
- Arabic and English with one pass
- Unit notes and flashcards, then questions to check your understanding
If you fail either part you pay its fee again (SAR 400) and wait for the next sitting, and you cannot get the Associate Engineer grade until you pass both parts. Source Last verified: 2026-11-17
