CCNA v1.1 revision plan
Organize revision by syllabus domain and combine questions with hands-on lab practice.
- Questions and time
- 60 questions in this site training session · 120 minutes
- Pass mark
- Practice assessment
- Exam fee
- US$300
Start with 10 free questions to find what needs more work. No sign-up, with answer explanations.
Try 10 free questions and see your levelPut what you just read into practice
Start with 10 free questions to find what needs more work. No sign-up, with answer explanations.
Try 10 free questions and see your levelCheck the exam version
These materials target v1.1. Testing for v2.0 begins on 3 February 2027; check the version when booking.
Start with addressing, switching and routing
Review IPv4 and IPv6, then VLANs, STP and EtherChannel. Read routing tables and practise static routes and OSPF in a lab.
Apply services and security
Test DHCP and DNS, and inspect device logs and time. Apply access controls in a training environment and verify their effect on traffic.
Practise automation decisions
Read JSON objects and arrays, trace a REST request from authentication through status and response validation, and compare controller workflows with manual configuration. Test a small change on a limited device set, verify the result and keep a rollback path. Validate AI suggestions against documentation and observed network state before applying them.
Record why you made an error
After each attempt, write down why your choice was wrong. Reproduce the case in a lab when the objective requires configuration or verification. This site's questions provide supplementary practice and do not replace hands-on work.
Finished reading? Try a set of questions
Start with 10 free questions to find your weakest units. Keep practising with the full question bank and mock exams from SAR 26.
Sources and references
- learningcontent.cisco.com learningcontent.cisco.com
- blogs.cisco.com blogs.cisco.com